-40%
Evenheat Replacement Control Relay for most Digital 220V/240V Kiln Set-Pro +More
Evenheat Replacement Control Relay for most Digital 220V/240V Kiln Set-Pro +More
Evenheat Replacement Control Relay for most Digital 220V/240V Kiln Set-Pro +More

Evenheat Replacement Control Relay for most Digital 220V/240V Kiln Set-Pro +More

$ 15.3

Availability: 60 in stock
  • MPN: 11801.200
  • Country/Region of Manufacture: China
  • Kiln Type: Kilns For Enamelling, Ceramics, Glass
  • Handmade: No
  • Condition: New
  • Suitable For: Studio
  • Brand: Evenheat

    Description

    Evenheat Replacement Control Relay for
    220V/240V
    Volt Kilns
    Evenheat
    Mechanical Relay for use with digitally controlled kiln models that are equipped with Set-Pro, Rampmaster, TAP and Genesis controls. Replaces
    11801.200
    This relay is a Double Pole, Single Throw (DPST) configuration. Output current 30A max. at 240Vac, coil operates from 12Vdc.
    From TE Tyco Electronics
    This relay is used as the control relay in mechanical relay designs and is used as the safety relay in our Quiet Drive Solid State designs.
    This relay fits the Digital Kilns that run on 220V/240 volts. This is the relay for the 18" and up kilns. There are usually 2 or more of these relays in the larger kilns. These relays cycle and off during the firing. Relays have a life in the 300,000 click range. If one bank of coils does not heat or stays on, then a new relay is needed. If a relay fails on, switch the kiln off at the breaker and unplug the kiln. Do not run the kiln again until the relay has been changed. It takes all the relays working together for the kiln to work properly.
    ADDITIONAL TECH DATA
    Vintage models equipped with Touchmatic (TM) and Perfect Fire controls use a different relay design. This relay will not directly fit into these models. Please contact Evenheat for assistance on these models.
    Check your kiln to make sure of fitment.
    You may have more than one installed.