Wireless Dental X Ray Unit 60kV Portable High Frequency Dental Imaging System

Description

moban2
Description
Wireless Dental X Ray Unit 60kV Portable High Frequency Dental Imaging System
Features
Features：
1.) The tube voltage frequency of this machine is 30 KHz, and the tube current is 0.2 MA. The radiation scope is at an angle of 24 degrees, located within a distance of 1.2 meters ahead.
2.) Toshiba 0.3mm x 0.3mm micro-focus tube
3.) No protective operation room is needed when installing the complete machine
4.) Flexible adjustment of position and angle of handpiece
5.) Compact in volume, light in weight, convenient for carrying
6.) Time is adjustable, high contrast of picture, imaging in focus
7.) There are vacuum components and high-pressure parts inside of the machine, so for your safety and the maintenance of the machine
8.) The tube head is equipped with excellent radiation-shield protection (except the radial mouth, and tests have shown that the radial index is zero. Safety is guaranteed.
9.) Non-film inspection and storage can be realized when corresponding to a sensor
Specifications
Voltage: 110v±10%
Power: 24V 8000MA
Charger: 110V, 50Hz
Tube current: 0.1mA
Rating: 60W
Frequency: 30 KHz
Exposure time: 1-9 seconds optional
Leak radiation: < 20μgy/h(12lb)
Focus Skin Distance: >20cm
Tube voltage: 60KV
Relative Humidity(RH) < 80%
Storage conditions: 5-40 degrees Celsius, relative Humidity
Net weight: 5.5 kg
Dimension: 47 x 42 x 19 cm
Content:
Main Unit x 1
Dental Film Position x 1
Charger x 1
English Manual x 1
Warranty Card x 1
Operation of the Main Unit
1. Upon receiving, open the box and check the product for possible damage during shipping.
2. Make sure the fittings on the encasement list are packaged within the box.
3. Connect the six-core cable (of the Main Unit) to the joint of the ball head and tighten the screw
4. After the Main Unit and ball head are perfectly fit together, plug in the international standard electrical source, grounding is strongly recommended.
5. Turn on the Power; the pilot lamp will be light up.During this time, the digital tube of the main unit will show the fore setting time. Now the equipment is in standby mode.
6. Setting the time (Skip to next step if unneeded) Use the "SET", "+", and" -" buttons to reset the time as follows: press SET, the pilot lamp above is illuminated, the machine is now in the time setting mode→then press "+" and" -" to set the time needed (time range is 0.5-9seconds); press set again when the time is adjusted the light lamp is off. The equipment is now in standby mode.
7. Put the Tooth film plumb behind the tooth which is going to be taken picture, and be as close as possible (the smooth side stick to the tooth
8. Keep the ball head plumb to the tooth projection position; Have the ball head, tooth, and tooth film steadily mutually plumb.
9. After positioning, use theEXP on the main Unit, the remote controller, or the button on the touch head tube to take pictures. The three methods have the same effect. (Notice: gently press)
10. After exposure to the tube, release the start button again (available in three ways) in case of an emergency to stop shooting and return to standby status. (At this point there was no output ray, so the dental films can be used again).Repeat step 6 to reset the picturing time.To repeat the picturing process, please repeat steps 7 to 9.
11. Turn the power of the main unit off when the work is finished, press POWER, making sure the pilot lamp is off. Don't keep the main unit long in standby mode.
Points for Attention
1. Make sure the angle of film, tooth, and ball head are properly aligned when taking a picture. Keep them steady until the last step of picturing; making sure that there is no change in any of their positions.
2. Remember to turn the power offwhen work is done.
3. Change the battery if the remote controller loses its functioning or if the remote's distance is shorted.
4. After turning the power on, wait one minute before taking pictures, this allows the ray to provide a steady output.
5. The equipment switches into protection mode automatically when the voltage is incorrect. If this occurs, it will not be able to carry out the normal work of filming.
6. When taking pictures, the EXP button could stop the objection and then the machine goes back to the preparation mode.
7. Use high quality tooth film and developing liquid to make clear pictures.
8. Handle the ball head gently while in use, so as not to damage the delicate component.
9. Do not pull hard on the cable which connects the ball head to the main unit.
10. The cable connecting the ball head to the main unit cannot bear the weight of the ball head, so do not raise the ball head by holding the cable, it will cause damage.
11. We usually set the time between 3-8 seconds when taking pictures, but the actual time of ray output is 0.2-0.5 seconds.
12. If a situation occurs, preventing the machine from taking regular pictures, contact the seller to solve the problem instead of trying to service the product yourself.
13. Keep the tooth film and the liquid in a proper place and use them within the shelf-life period. While, because the liquid is not allowed to ship by carrier normal, so we take it out before ship, look forward to your understanding.
14. Development of films should be performed at temperatures ranging between 23-25 degrees Celsius to ensure the image quality.
15. Other requests accordance with the scope of the technical parameters.
16. Please read the manual carefully before using.
Statement (FDA)
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
Payment
a)   Paypal accepted.
b)   Please accomplish payment within 7 days after purchase. If you do have any reason cannot make payment timely, kindly please email me. Otherwise, all unpaid items will be filed an unpaid item dispute through eBay.
c)    Import duties, taxes and charges are not included in the item price or shipping costs. These charges are the buyer's responsibility. Please check with your country's customs office prior to bidding/buying to determine what these additional costs will be.
Delivery Details
We use international Express Shipping Service.
Fedex, DHL, EMS(over 2KG): 7-12 days.
EUB (under 2KG): Only for USA, Canada, and Australia. 9-15 days.
China Post (under 2 KG): 25-55 days.
Note:
We can offer the tracking number for u to check the status of your item in 2 days after we deliver it. For international shipping, customs duties might be possible for some countries, they are buyers'responsibility, Hope his could be understood. S&H charged dose not include any those fees. We are not responsibility for the delay of clearance in the buyer's country, but we will help you clear as suppling some files. If the item is in customs or post office for some days, pls contact with local customs actively, otherwise, if the item returns to us, the buyer will pay for the shipping fee for resend or refund except the shipping fee. Few states need to pay remote surcharge. Don't worry, I will tell you before you pay if it's need.
We only ship to your PayPal address. Please make sure it's correct. You can email us in 1-2 days to change ur shipping address, or we are not responsible for it after we deliver ur products.
Return Policy
Your SATISFACTION is our ultimate goal. We work hard to earn your trust and future business.
a)   Please check the package first before you sign for the package. If the package has any damage, please file a claim on your local shipping company.
b)   If you have a defective item, you can return it or ask for a discount. Please contact us within 2 days after you receive the package.
c)   What you returned must be unused and in the original packaging as received. Customer is responsible for shipping charges on returned items.
d)   We will refund the money to you when we get the return items. Or replace item for you.
Terms of Sales
Please leave us your phone number for smooth and fast delivery.
Our prices does not include any taxes, VAT and other hidden charges.
Buyers should be responsible for your customs duties if there is any.
If you need some profiles, please contact us. We will attach it via Email.
About us
We are factory founded dental equipment Wholesaler and Retailer.
We offer 1 full year warranty for most of our items(please contact us for more info).
Each item will be quality checked before shipping to our customers.
Contact us
If you have any questions about our service or products. You can send us eBay message or Email.
You will be replied within 24 hours(48 hours in the weekend).